Views: 740

Warman® AH®, M

Product code : 1492663104



    Key features/benefits

    • Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
    • Liners-easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer.
    • Elastomer seal rings back all liner joints.
    • Casing–Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
    • Impeller–front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
    • Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
    • Throatbush–wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
    • One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly.
    • An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance


    • Mill discharge
    • Process pumps
    • Low pressure tailings


    • Slurry transportation

Related Products